Exterior cladding on a Santon Downham property will last far longer if you understand what it needs from you in the years after installation.
Call any time. Calls are answered day and night and passed straight to our roofers.
Exterior cladding is installed to protect your walls from rain, frost and wind while giving the property a clean, maintained appearance. The materials used today - timber, composite and fibre cement - are all designed to cope with British weather, but none of them are entirely maintenance-free. A small amount of regular attention prevents the kind of slow, cumulative damage that eventually needs expensive remedial work.
Cladding failure is almost never sudden. It builds over months or years as small issues - a blocked gap, a minor split in a board end, a loose fixing - are left unaddressed. Catching these early is the difference between a half-hour fix and a full section replacement.
Once or twice a year, walk around the property and take a proper look at the cladding from ground level. You do not need to go up a ladder - binoculars work well for checking upper sections. Look for the following:
None of these observations require you to touch the cladding. They are visual checks that take ten minutes and can prompt you to call a contractor before a small issue becomes a large one.
Algae and moss growth is the most common issue on north-facing or shaded elevations. Left alone, it holds moisture against the face of the board and accelerates surface breakdown. A soft brush and a dilute proprietary biocide wash is the standard approach. Avoid pressure washing at high pressure on timber and fibre cement boards - the water can be forced into joints and behind the boards if the pressure is too high, causing exactly the kind of moisture ingress the cladding is designed to prevent.
Low-pressure rinsing with a garden hose is fine for removing loose dirt. If you are using any cleaning product, check the manufacturer's guidance for your specific cladding material, as some solvents or bleach-based products can affect surface coatings.
Timber is the most maintenance-demanding of the three main cladding materials. Untreated or poorly maintained timber absorbs moisture, swells, and can split at the edges. The treatment schedule depends on the product - some factory-finished timbers need recoating every three to five years, others are more durable. The key indicator is when the surface starts to look dry, chalky or when water is no longer beading on the surface.
When treating timber cladding, the cut ends and the backs of any boards that are accessible need attention as much as the visible face. End grain absorbs moisture far faster than the long grain face, and this is where rot typically starts. Any repairs to individual boards should include sealing cut ends before the board is refixed.
Composite cladding boards are engineered to be low-maintenance. They do not rot or swell in the way timber does, and they do not need periodic treatment with stains or oils. The main maintenance task is keeping them clean and checking that fixings have not worked loose over time.
Composite boards can still harbour algae and dirt in their surface texture, particularly on boards with a wood-effect grain. An annual wash with a soft brush and mild detergent is usually enough to keep them in good condition. Check the drainage channels and joints for leaf debris that could block water from running clear of the boards.
Fibre cement is among the most durable cladding materials available for domestic use. Its main vulnerability is at cut edges and drilled fixings where the factory-applied surface coating has been broken. These spots can absorb moisture over time if they are not sealed at installation and kept sealed during the life of the cladding.
Inspect the edges around windows, doors and at the top of the cladding run every year or two. If you spot an area where the surface colour has changed or the edge looks as though it is drawing in moisture, a coat of the appropriate touch-up paint or sealant applied promptly will prevent a much larger problem developing.
Guttering failure is one of the most avoidable causes of cladding damage. When a gutter overflows or a downpipe leaks against the face of the cladding, water runs down the boards repeatedly in heavy rain and accelerates every form of deterioration. Keeping gutters clear of leaf debris and checking that brackets are holding the gutter at the correct fall is basic maintenance that directly protects the cladding below.
Check gutters at least once in autumn after the leaves have fallen. If you can see a waterfall of debris running out over the front of the gutter during heavy rain, that is a job to deal with before winter rather than in spring.
Some cladding maintenance is genuinely suitable for a homeowner with a steady ladder and confidence working at low heights. Cleaning boards at ground-floor level, applying touch-up sealant to a visible edge and clearing gutters from a short ladder are all reasonable DIY tasks if you can do so safely.
Anything that involves working at height above the first floor, lifting boards to inspect behind them, dealing with flashing details at the roof line, or replacing full sections of cladding should be done by a contractor with proper access equipment. The risk from a fall is not worth the saving, and getting the flashing and sealing details wrong at height creates problems that can be expensive to put right.
We install and maintain exterior cladding in Santon Downham and the surrounding area, working in timber, composite and fibre cement. Because we are roofers, we pay particular attention to how cladding integrates with the roof line and guttering - the junctions where most problems begin.
If you have had cladding installed and want a check-up, or if you have spotted something during your own inspection that you want a professional opinion on, call us to arrange a visit.
How often should I have cladding professionally inspected? A visual check every year is good practice. A professional inspection every three to five years, or after any severe weather, catches issues that are not visible from ground level.
Can I paint over old cladding to refresh it? On timber, yes, provided the surface is properly prepared and a suitable exterior paint or stain is used. On fibre cement, manufacturer-approved coatings can be applied. Composite boards are generally not painted as the material itself is coloured through.
What causes boards to bow outward? Bowing is most commonly caused by moisture getting behind the boards with no way to escape, or by boards being fixed too tightly without room for natural thermal movement. Both causes need professional assessment.
No obligation · We'll call you to arrange a free visit
Call any time. Calls are answered day and night and passed straight to our roofers.