If you have a redundant chimney stack on your Feltwell home and you're thinking about having it taken down, knowing what to look for in a roofer - and what to ask before any work begins - can save you a great deal of money and frustration.
Call any time. Calls are answered day and night and passed straight to our roofers.
A chimney stack that is no longer connected to a working fireplace or stove does nothing useful. It sits above your roofline, exposed to wind, rain and frost, and it deteriorates just like any other brickwork - only faster, because it has no protection from above. Flashings corrode, pointing cracks, and water finds its way in. The result is damp patches on ceilings, stained walls, and in some cases structural movement in the stack itself.
Taking the stack down below roof level removes the problem permanently. The hole in the roof is closed off with a lead slate and matching tiles, so the line of the roof is restored and weather is kept out. All the broken-down brickwork is removed from your property and disposed of properly - it is not left in a skip on your drive for weeks.
A chimney take-down is not simply knocking bricks off a roof. The roofer needs to work safely at height, remove the stack in a controlled way so debris does not damage tiles or guttering below, cut back the brickwork to below the roofline, and then make the roof watertight again. The finish matters: a poorly fitted lead slate will let water in just as quickly as the old chimney ever did.
The surrounding tiles have to be disturbed to fit the lead slate properly. A good roofer will lift and relay those tiles carefully and replace any that are cracked or broken in the process. The mortar bed and ridge tiles near the old stack position may also need attention. Ask specifically how the roofer intends to handle each of these stages.
In Feltwell and the surrounding villages, you will find a mix of local sole traders, small roofing businesses, and larger firms that cover a wide area. There is no single right answer on size - what matters is the quality of the work and whether the person quoting you actually understands what the job involves. Here is what to look for and what to ask.
A very low price can mean corners will be cut. The lead slate is the most expensive single material in a chimney take-down - if a quote seems unusually cheap, ask what specification of lead is being used. Lead sheet is sold by code number, with Code 4 and Code 5 being the standard choices for roof flashings and slates. Code 3 is thinner and will not last as long in an exposed position.
Be cautious of anyone who quotes without looking at the chimney. A roofer who gives you a firm price over the phone without visiting the property is guessing. The height of the stack, the pitch of the roof, the type of tile, and the condition of the surrounding area all affect both the method and the cost.
Avoid anyone who suggests leaving the stack in place and simply capping it with a concrete slab or flaunching. Capping does not stop long-term deterioration of the brickwork and will not deal with existing water ingress through the flashings. It is a short-term fix that costs money twice.
For a job of this size - typically £500-£1,200 for a single stack depending on height, accessibility and the extent of tile making-good - it is sensible to get two or three quotes. When comparing them, make sure each quote covers the same scope of work: take-down to below roof level, lead slate, tile making-good, and waste removal. A quote that omits any of those things will look cheaper but probably is not.
Ask each roofer to put the scope of work in writing before you agree. That does not need to be a long contract - even a brief email or a simple written quote that spells out what is included is enough to protect both sides.
Once the job is done, the roofline should look clean and consistent. There should be no visible gap in the tile line, the lead slate should sit flat and be properly dressed against the surrounding tiles, and the ridge should be unbroken. Inside the house, any existing damp caused by the old chimney stack may take a few months to fully dry out, depending on how long water had been getting in. New damp patches appearing after the work is done, however, mean the repair was not completed correctly.
If you are in Feltwell and you would like Brandon Roofers to visit and survey your chimney stack, call us to arrange a time that suits you.
No obligation · We'll call you to arrange a free visit
Call any time. Calls are answered day and night and passed straight to our roofers.